Installation - Toshiba e-studio191f Service Manual

9 Installation

Refer to the Operating Instructions (For Basic Operations).
Fax Parameter Table (AU) for reference
No. Parameter
001 CONTRAST
(HOME)
002 RESOLUTION
(HOME)
004 STAMP (HOME)
005 MEMORY
(HOME)
006 DIALING
METHOD
007 HEADER PRINT
008 HEADER
FORMAT
009 RCV'D TIME
PRINT
010 KEY/BUZZER
VOLUME
Setting
Setting
Number
1 Lightest
2 Lighter
*3 Normal
4 Darker
5 Darkest
*1 Standard
2 Fine
3 S-Fine
4 600dpi
5 Halftone
(Fine)
6 Halftone
(S-Fine)
7 Halftone
(600dpi)
*1 Off
2 On
1 Off
*2 On
1 Pulse
*2 Tone
*1 Inside
2 Outside
3 No print
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid
2 Valid
1 Off
*2 Soft
3 Loud
Setting the home position for the CONTRAST.
Setting the home position for the RESOLUTION.
Setting the home position for the STAMP.
To select the stamp function when the document is
stored in memory, see Fax Parameter No.28 (STAMP AT
MEM. XMT).
Setting the home position for the MEMORY.
Selecting the dialing method.
Selecting the printing position of the header.
Inside:
Inside TX copy area.
Outside:
Outside TX copy area.
No print:
Header is not printed.
Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page
number on the bottom of each received document.
Selecting the key touch beep sound.
215
Comments
DP-1910F