Toshiba DP125F Operator's Manual page 148

Continuous Polling - continued
5 6
Select the Day of the
Week
Select the day of the week to Enter the number of the remote
start polling. When the day-of- facsimile using any of the fol-
week range is displayed cor- lowing dialing methods.
rectly, press:
NOTES:
• To designate the start or
end day, use /
to move the entry point.
After each entry, the selected
facsimile is displayed for 2 sec-
• Press / to
onds.
change the day.
PROG. CONT. POLL.
ENTER TEL NUMBER,
ABB. NUMBER OR
ONE TOUCH KEY
Repeat this procedure until all
remote facsimiles are entered.
146
7
Enter the Number of
Remote Facsimile
When all the remote facsimile
locations have been entered in
Step 6, press:
• One Touch Key Dialing
... See page 97
If the remote facsimile is a
• Abbreviated Dialing
TOSHIBA facsimile and a 4-
... See page 98
digit
• Alphabet Dialing
grammed to the document to be
... See page 99
polled, go to Step 8.
• Keypad Dialing
... See page 100
If the remote facsimile is not a
TOSHIBA facsimile or no Secu-
rity Codes are in use, press:
No Security Code will be se-
lected and the facsimile will re-
PROG. CONT. POLL.
turn to the Standby Mode.
ONE TOUCH= 24
The facsimile will automatically
PORTLAND PLANT
start polling at the time set in
this procedure.
PROG. CONT. POLL.
ENTER MORE OR
PRESS [START]
8
Select the Security Enter the Security
Code Option Code
Enter the 4-digit security code
for the document to be re-
trieved.
security code is pro-
POLLING
SECURITY CODE =11111
When the 4-digit security code
is entered, press:
The procedure is now complete.
The
Standby Mode.
The facsimile will automatically
start polling at the time set in
this procedure.
****
display returns to the