Line-2 Operation - Toshiba DP125F Operator's Manual

Line-2 Operation

If your facsimile is equipped
1
with the Line-2 Board, you can
configure its operation as fol-
lows.
Press:
2
Display the LINE-2 Configure Line-2
MODE Menu Operation
Select "1.TX/RX" if the second
line is used for both transmis-
sion and reception by pressing:
+
+
Select "2.RECEPTION ONLY" if
the second line option is used
for reception only by pressing:
+
Select "3.TIMER" if the second
+
line option is used for reception
only during a specific time range
set in Step 3.
LINE-2 MODE
1.TX & RX
When either 1 or 2 is selected,
2.RECEPTION ONLY
the "OPERATION COMPLET-
3.TIMER
ED" message is displayed. Con-
tinue to the final step.
When 3 is selected, the follow-
ing screen is displayed to set
the time period for reception. If
any data is already set, it is dis-
played on the bottom row.
RECEPTION ONLY
TIME PERIOD =
3
Enter the Start Time
and End Time
Enter the start time and end
time of the time period in which
the Line-2 will be used for re-
ception only.
(Default)
NOTES:
For 24-hour format:
00:00 to 23:59
For 12-hour format:
12:00 to 11:59, and the
AM or PM designation
When the correct time period is
entered, press:
OPERATION COMPLETED
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
00:00 -00:00
4
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to exit the Configuration Setting
mode and return to the Standby
Mode.
69