Redialing; Automatic Redialing; Manual Redialing Direct Transmission - Toshiba DP125F Operator's Manual

Redialing

Automatic Redialing

When the line of the remote This function enables you to re-
party is busy, the facsimile will dial the number last dialed us-
automatically redial the remote ing this facsimile to transmit a
party up to the set number of document.
times with intervals of the set
length (see page 67). WARNING:
If the line is not connected after
the set number of redialing at-
tempts, the facsimile will record
a LINE BUSY error.
Confirm the facsimile number of
the remote party and repeat the
transmission procedure.
NOTE:
110

Manual Redialing Direct Transmission

1
To enter the On-hook Dialing
(Monitor Speaker Dialing) mode,
press:
If you press , the fac-
simile will clear the facsimile
number registered and lose
ON HOOK
the manual redial capability.
TEL NUMBER=
This feature will not function
with numbers dialed using
an external telephone.
2
Press the MONITOR Press the REDIAL
Key Key
Press:
The last number dialed is dis-
played. The display varies de-
pending on the dialing method
used.
The displayed number is imme-
diately redialed.
ON HOOK
TEL NUMBER=
0559761234
If no number is registered as a
redial number, the screen below
is displayed for 2 seconds, then
returns to Step 1.
ON HOOK
NUMBER NOT LISTED
3
Redial the Remote
Party
When you hear the answering
tone, press . If
the remote party answers the
phone, pick up the handset (op-
tional). Inform the remote party
that you wish to send a docu-
ment.
Upon hearing the facsimile
tone, press:
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
MAY-17-00 WED11:49
RESIDUAL MEMORY 100%