Setting The Page Count - Toshiba DP125F Operator's Manual

Setting the Page Count

When this function is set to ON,
1
the designated number of pages
will be printed at the top of the
recording paper at the remote
station. This function is effective
Load the document face down
for a Direct Document Trans-
in the Document Tray (see page
mission only. (The total number
88).
of pages will be printed auto-
matically as part of the TTI in
Adjust the resolution and con-
Memory Transmissions.)
trast if desired (see page 89).
This setting is very helpful for
confirming that all of the pages
loaded into the feeder have
been successfully sent.
It will also assist the recipient to
track the number of pages as it
will add a page count to a the
TTI at the top of your transmit-
ted pages (i.e., 1/5, 2/5, 3/5,
etc.).
The facsimile will compare the
number of pages actually sent
with the number you entered.
192
2
Load the Document
Press:
MAY-17-00 WED11:13
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
PAGE NUMBER
PAGE NUMBER =(1-999)
3
Display the PAGE Enter the Number of
NUMBER Menu Document Pages
Enter the number of document
pages (1 to 999).
+
+
The press:
COMM. RESERVATION
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option at
this point.
• One Touch Key Dialing
... See page 97
• Alphabet Dialing
... See page 98
• Abbreviated Dialing
... See page 99
• Keypad Dialing
... See page 100