Terminal Id Setting - Toshiba DP125F Operator's Manual

Terminal ID Setting

In compliance with FCC regula-
1
tions (see page 1), this facsimile
places your company's name,
facsimile telephone number and
date & time on the top of all
Highlight
transmitted documents. This
feature enables remote parties
to easily identify your docu-
ments and the time of transmis-
using
sion.
press:
To display the SETUP menu,
press:
+
1.LANGUAGE
2.DATE & TIME
3.TERMINAL ID
4.DIAL TIPE
NOTE: Only 4 selections can
be displayed at one
time.
If the terminal ID is already set,
the current name is displayed on
the last row.
The new name will be displayed
on the last row as it is entered.
42
2
Display the
TERMINAL ID Menu
Enter your user ID (company
name) using the Keyboard and
3.TERMINAL ID Numeric Keypad. You can use
up to 40 characters.
For more information on select-
or and
ing characters, see page 34,
Character Entry.
When your ID name is displayed
correctly on the LCD display,
press:
or
Your facsimile will prompt you
for your telephone number's in-
ternational code.
SET TERMINAL ID
INT. CODE ?
ID NAME =(MAX40)
1.ADD +
2.NOT NEEDED
Displayed for 2 seconds
ENTER NAME
ID NAME =(MAX40)
3
Enter the User ID Select the
International Code
If you send documents over-
seas, adding your International
Code (country code) to your
stored ID name will enable the
remote party to identify the
country from which the docu-
ment has been sent. The 1st
digit(s) following the "+" sign is
for the International Code.
If you send or receive docu-
ments to and from overseas, se-
lect ADD + by pressing:
If all of your documents are sent
domestically,
NEEDED by pressing:
SET TERMINAL ID
TEL NUMBER =(MAX20)
+
The "+" is displayed when ADD+
is selected.
4
Enter Your
Telephone Number
If you selected ADD+ in Step 3,
enter the International Code for
your country before entering
your area code and telephone
number.
Example: United States = 1
Then, enter the telephone num-
ber that has been connected to
the facsimile.
select NOT
Check the LCD display to make
sure your telephone number ap-
pears correctly, then press:
If the Line-2 board is installed
repeat Steps 3 and 4 for Line 2,
then go to Step 5.
INT. CODE ?
1.ADD +
2.NOT NEEDED
LINE-2