When The Recorded Image Is Not Clear; Document Scanner Cleaning Procedure - Toshiba DP125F Operator's Manual

When the Recorded Image is not Clear...

If the Document Scanner Unit
is dirty, your documents may
not be transmitted clearly. If
the Recording Unit is dirty, the
document you receive may not
be clear. In that case, clean the
Document Scanner Unit or Re-
If the problem occurs during
cording Unit using the following
both a transmission and in copy
procedures. You can check
mode, check the Document
these problems by making a
Scanner Unit.
copy.
If the problem occurs during
Examples of print problem:
both receptions and copy mode,
check the Recording Unit.
Vertical black line(s)
Vertical white line(s)
Horizontal black line(s)
Horizontal white line(s)
Faint or blurred print

Document Scanner Cleaning Procedure

1
Open the Scanner
Cover
Stained
Press the Scanner Cover Re-
lease Button to open the Scan-
ner Cover.
Wipe the Glass
2
Surface and White
Plate
Scanner Cover
White Plate
Release Button
077
Wipe the Glass surface and
the White Plate with a soft dry
cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
3
Wipe the ADF Pad
and Rollers
ADF Pad
Glass
096
Wipe the ADF Pad and Rollers
with a dry cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
CAUTION:
Be careful not to injure your
finger(s) on the ADF spring
when you wipe the ADF pad.
097-1
235