Lcd Test - Toshiba DP125F Operator's Manual

LCD TEST

The LCD test checks LCD op-
1
eration by turning on and off
all the elements of the LCD on
the Operation Panel.
Press:
246
2
Select the LCD TEST Start the LCD Test
Menu
Press:
+
All of the elements of the LCD
+
should turn on (as is the ex-
ample below).
Five seconds later, all the ele-
+ ments should turn off. Visually
check that all the elements
have turned on and off nor-
mally. The test result input
+
screen is displayed five sec-
onds after the elements turn
off.
LCD TEST
LCD WILL TURN BLACK
AND THEN CLEAR
PRESS START KEY
LCD TEST
ENTER TEST RESULT
1.OK
2.NG
3 4
Select the Test Result
Option
If all elements of the LCD turn
The word "OPERATION COM-
on and off normally, press:
PLETED" is displayed on the
screen and the unit returns to
the
screen.
The result of the LCD test can
If even one elements fails to
be confirmed with the self test
turn on and off, press:
report. To print the self test re-
port, refer to "PRINTING A
TEST RESULT" on page 252.
If the result of the LCD test is
judged to be NG, call your ser-
vice representative.
Completed the
LCD TEST
individual test selection