Toshiba DP125F Operator's Manual page 81

Plain paper facsimile
Hide thumbs Also See for DP125F:
Table of Contents

Advertisement

One Touch Dialer Registration - continued
7
Enter the Telephone Number
Enter the telephone number you
number on the bottom row of
want to store (up to 128 digits).
the LCD display. If it is correct,
press:
NOTE:
If your facsimile is connected
to a PBX system, you may
need to enter an access digit
(9) and pause so the system
will connect you to an out-
side line. In such cases,
press
to enter a 3-sec-
ond pause. This pause may
be repeated if necessary and
may be entered anywhere
between digits. A pause en-
try is indicated as a hyphen
"–" on the LCD display.
Check the entered telephone
8
Enter the Alternate
Number (Optional)
Alternate Numbers are optional.
If the remote location does not
have two or more facsimiles in
the same area, you can leave
this entry blank. (See page 77
for more information.)
Enter the Alternate Facsimile
Number:
ONE TOUCH=
03
2nd TEL NBR=(MAX128)
Then press:
COMM. OPTION?
1.YES
2.NO
9
Select Communication Options (Advanced Setup)
This setting will allow you to
9a
specify one or more of the fol-
lowing Communication Options
for the One Touch key you are
registering.
To select the most popular set-
tings, skip this step (recom-
Delayed Communication
mended) and return to Step 3 by
Default=off
pressing:
Select to program a trans-
mission start time.
Transmission Report
Default=off
To specify the Communication
Enables
or
disables
the
Options, press:
printing of a TX Report.
Line Monitor
Default=off
Enables or disables the line
When "1.YES" is selected, the
monitor speaker during dial-
COMM. OPTIONS screen ap-
ing.
pears. Follow the next steps for
Quality TX
each item selection.
Default=off
Selects
a
lower
modem
speed for poor communica-
tion links.
Sub Address
Default=none
Specifies a Sub Address for
the One Touch key being
registered. The remote unit
must support Sub-Address
capabilities.
Tel Line Select
Default=first available
Specifies which tel line is se-
lected when the 2nd Line is
installed.
Select the
Communication Option
COMM. OPTIONS
1.COMPLETE
2.DELAYED COMM.
3.TX REPORT
4.LINE MONITOR
5.QUALITY TX
6.SUB ADDRESS
7.TEL LINE SELECT
These items are outside the
LCD frame. To view them,
use the [
] scroll key.
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp120f

Table of Contents