Toshiba DP125F Operator's Manual page 54

Power Saver Operation - continued
5
Select the Printer Power Saver Function
Enable or Disable the Printer
Power Saver function.
(to set Printer Power Saver ON)
(Example if the 12-hour format
option is selected in DATE &
TIME setting)
When "OFF" is selected, the
(to set Printer Power Saver OFF)
"OPERATION
message is displayed as shown
If "ON" is selected, the currently
at the bottom in Step 6. Returns
set time period is displayed be-
to Step 1.
low. The time on the left is the
Printer Power Saver start time
(or time that the printer unit will
power down). The time on the
right is the Printer Power Saver
end time.
PRINTER POWER SAVER
TIME PERIOD =
00:00 - 00:00
(Example if the 24-hour format
option is selected in DATE &
TIME setting)
52
6
Move the cursor to the desired
PRINTER POWER SAVER
position, using the following
keys.
TIME PERIOD =
12:00AM-12:00AM
Enter the time period.
COMPLETED"
Change the AM/PM designation
if selected by pressing the fol-
lowing keys.
When the correct time period is
displayed, press:
OPERATION COMPLETED
Displayed for 2 seconds
The display returns to Step 1.
7
Enter the Start Time
Select Another
and End Time SETUP Item, or ...
After completing this Configura-
tion Setting, press
or
to exit the Configuration Setting
mode and return to the Standby
Mode.
or