Toshiba DP125F Operator's Manual page 78

Abbreviated Dialer Registration - continued
9
Select Communication Options - continued
9h
Select the Telephone Line
If your facsimile is equipped with To allow the Line to be selected
the Line 2 Board, you will be automatically, press:
able to designate which phone
line to use (Line 1 or Line 2) for
this Abbreviated Dial Number by
pressing:
To designate Line 1, press:
To desingnate Line 2, press:
TEL LINE SELECT
1.FIRST AVAILABLE
2.LINE #1
3.LINE #2
Returns to Step 9.
76
10
10a
To assign this Abbreviated Dial
Number to a One Touch Key,
press the desired One Touch
Key (Example: One Touch Key
01).
ABB. NBR=
ONE TOUCH=
L.A. OFFICE
REGISTERED
ENTER ABB. NUMBER
OR PRESS
[BACK]:TO PREVIOUS
[STOP]:TO COMPLETE
COMM. OPTIONS
Returns to Step 2.
1.COMPLETE
2.DELAYED COMM.
3.TX REOIRT
Press
Operation mode and return to
the Standby Mode.
Assign the Abbreviated Dial Number to a One Touch Key
Assign the Abbreviated Dial Number to a One Touch Key
10b
Assign the Use a Preassigned One Touch Key
One Touch Key
If the desired One Touch Key
has been previously linked to
another Abbreviated Dial Num-
ber or preset with a separate
One Touch number, one of the
following screens will be dis-
played.
One Touch key has been as-
signed to an Abbreviated Num-
001
ber:
01
ONE TOUCH=
ALREADY ASSIGNED
After 2 seconds:
ABB. NBR=
SMITH'S OFFICE
One Touch key has been as-
signed with an Individual Phone
Number:
ONE TOUCH=
ALREADY ASSIGNED
ONE TOUCH=
WEST REGION CENTER
to exit the Menu
ONE TOUCH=
CANCEL ?
1.CANCEL
2.RETAIN
To CANCEL the existing link or
One Touch assignment and re-
turn to Step 10a, press:
To RETAIN the existing link or
One Touch assignment and re-
turn to Step 10a, press:
01
003
Returns to Step 10a.
ABB. NBR=
PRESS ONE TOUCH KEY
TO ENTER OR
[ENTER]:TO SKIP
01
01
After 2 seconds:
01
001