Initial Printing Supplies Installation; Recording Paper Installation - Toshiba DP125F Operator's Manual

- INITIAL PRINTING SUPPLIES INSTALLATION

Recording Paper Installation

About Recording Paper:
1
• Use only recommended paper
brands to optimize your fac-
simile performance. Contact
your authorized TOSHIBA
dealer for more information.
• Remove the recording paper
when storing or relocating
your facsimile.
• Avoid using damaged, folded
or misaligned recording paper.
Use of damaged paper could
cause double feeding or paper
Pull the paper tray out using the
jams.
handle located at the front of the
tray.
• Use of damp recording paper
will cause poor printing over
Pull the tray straight out toward
all or part of the image area. If
you as illustrated above.
the paper is excessively moist,
print quality may become un-
even and voiding may occur.
CAUTION:
Replace the paper, should this
•
condition exist.
20
2
Pull Out the Paper Attach the Recording
Tray Paper Size Label
Recording Paper
Size Label
029 030
If not already at the correct pa-
per size, insert the Paper Size
Label into the slot of the Paper
Tray.
See page 22 for information on
changing the recording paper
size.
Never place heavy objects
on an open tray, nor apply a
strong force.
3 4
Press Down the
Paper Pressure Plate
Paper
Pressure Plate
032
Press the Paper Pressure Plate Prepare new recording paper
down until it clicks. sheets by holding both ends and
flexing several times.
This will separate the sheets
and provide optimum feeding.
Align the stack so that all four
corners are neatly aligned.
Be sure to load the recording
paper in accordance with any
paper manufacturer's printing
side instruction. Some papers
have a preferred image side.
This image side should be
placed face down in the paper
tray.
Prepare the
Recording Paper
031