Communication Report Print - Toshiba DP125F Operator's Manual

Communication Report Print

You can request a communica-
1
tion report every time a docu-
ment is sent. If you desire a
communication report every
time you send a document, set
Load the document face down
this function to ON as a default
in the Document Tray (see page
(see page 195).
88).
If you plan to use communica-
Adjust the resolution and con-
tion reports only occasionally,
trast if desired (see page 89).
use this procedure. The TX Re-
port key allows you to obtain a
report for one communication
only.
You can activate this option
while programming an Abbrevi-
ated Dial Number (see page 70)
or One Touch Dial Key setting
(see page 77) if communication
with a specific remote party al-
ways requires this option.
182
2
Load the Document
Press:
MAY-17-00 WED11:13 TX REPORT
1.ALWAYS
RESIDUAL MEMORY 100% 2.ON ERROR
ENTER TEL NUMBER 3.OFF
3
Display the TX Select the Option
REPORT Menu
To set the DP120F/DP125F to
always print a communication
report in any condition, press:
To set the DP120F/DP125F to
only print a communication re-
port when an error condition is
encountered, press:
To set the DP120F/DP125F to
never print a communication re-
port, press:
COMM. RESERVATION
RESIDUAL MEMORY
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100
80%