Recording Paper Size; Reception Reduction Setting - Toshiba DP125F Operator's Manual

Recording Paper Size

This facsimile can use Letter and Legal size paper. The received
document is recorded (printed) within the Effective Recording Area
of the paper.
Paper Size
Effective
Letter: mm
Recording
C D
inches
Area
Legal: mm
inches
B
A
NOTES:
• If the received document is equal to or shorter than the re-
cording area of the paper, the received document is printed at
its actual size.
• If the received document is larger than the recording area of
the paper, it will be vertically reduced to fit on the recording
paper installed. The reception will be divided onto two sheets
if the document needs to be reduced to smaller than 73% of
its original size.
Document
• If you desire to receive large originals without reduction or
excessive paper usage, set the "DISCARD" function to "ON."
If the lower part of the original exceeds the recording paper
by 13 mm or less, the image will be automatically discarded.
This predetermined dimension is a service function setting.
Contact your Toshiba dealer for the setup.
• If the "RX REDUCTION" function is "OFF", the larger original
will be recorded on two or more sheets. The top of the sec-
ond page will repeat about 5mm of the lower part of the first
page.

Reception Reduction Setting

This function allows the reduc-
tion of the received image, if
the received
larger than the recording pa-
D per.
A B C
216 210 271 279
8.5 8.3 10.6 11.0
356
216 210 348
8.5 8.3 13.7 14.0
Recording Paper
1
Display the SET RX
REDUCTION Menu
document is
Press:
+
+
+
+
RX REDUCTION
1.ON
2.OFF
2
Select the Desired
Option
Select the desired option.
To set RX Reduction to ON,
press:
To set RX Reduction to OFF,
press:
OPERATION COMPLETED
113