Advanced Functions; Multi-Address Transmission (Broadcasting); Group Broadcast Transmission - Toshiba DP125F Operator's Manual

ADVANCED FUNCTIONS - MULTI-ADDRESS TRANSMISSION (BROADCASTING)

Group Broadcast Transmission

The Group Broadcast Transmis-
1
sion feature allows you to send
a document to multiple remote
parties in a single operation.
Load the document face down
Note that a Group Broadcast
in the Document Tray (see page
Transmission requires all pages
88).
to be scanned to memory prior
to dialing, and thus adequate re-
Adjust the resolution and con-
sidual memory is required.
trast if desired (see page 89).
NOTE:
If the optional handset is in-
stalled, the handset dialing is
not available.
2
Load the Document Select the Group
Location
Press the One Touch Key pro-
grammed for the desired group.
COMM. RESERVATION
ONE TOUCH =
MAY-17-00 WED11:49
COLORADO GRP
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
SCANNING INTO MEMORY
FILE NBR =
RESIDUAL MEMORY
Standby Mode screen
Or, display the Group Dial Di-
rectory by pressing:
COMM. RESERVATION
GROUP NBR =(1-1999)
Go to Step 3.
3
Enter the Group
Number
Enter the Multi-address Trans-
mission Group Number (1 to
1999).
EXAMPLE:
To enter the Group Number
0001, press:
35
After 2 seconds:
(Leading zeros, if any, may
be omitted.)
xxx
70%
NOTE:
When an incorrect number
When document scan-
ning is completed:
is entered, use
lete the preceding digits, or
press
ABB
over from the beginning.
DIRECTORY
GROUP
+
COMM. RESERVATION
GROUP NBR =(1-1999)
4
Press the START
Key
When the correct Group Num-
ber is displayed, press:
COMM. RESERVATION
GROUP NBR =
COLORADO GRP
After 2 seconds:
SCANNING INTO MEMORY
FILE NBR =
RESIDUAL MEMORY
to de-
When document scan-
ning is completed:
Standby Mode screen
once to start
1
0001
xxx
70%
123