Adf Test - Toshiba DP125F Operator's Manual

ADF TEST

The ADF test checks the op-
1
eration of the ADF by trans-
porting and unloading docu-
ments. You can check that the
ADF is normal if the number of
Press:
documents loaded is consis-
tent with the number of docu-
ments transported and un-
loaded.
You can change the transport
speed by pressing
242
2
Select the ADF TEST
Menu
Load the documents in the
document tray and press:
+
+
The documents will be trans-
ported one by one and the
number of documents unloaded
will be displayed at the lower
+
right on the screen.
+
ADF TEST
LOAD DOCUMENT
.
STD: Fast
FINE (Same when HALF
TONE is set): Medium
U-FINE (Same when HALF
TONE is set): Slow
Load the Document
If a document jam occurs dur-
ing transport, the screen below
is displayed.
ADF TEST
DOCUMENT JAM
Remove
ment. You can resume the test
by pressing
ADF TEST
PAGES 001
After transporting
all the documents
ADF TEST
START TO RESTART OR
STOP TO COMPLETED
PAGES XXX
3
To Continue or Exit
the Test
To continue the ADF test,
press:
PAGES XXX
Load the
then press:
the jammed docu-
.
To end the test, press:
ADF TEST
PAGE NUMBER CORRECT?
1.YES
2.NO
documents again,