Dial Type Setting - Toshiba DP125F Operator's Manual

Dial Type Setting

There are two types of dialing
1
modes: DP [Dial Pulse (Rotary)]
and MF [Multifrequency (touch
tone)]. If your telephone emits
tones when you are dialing, this
Highlight
usually indicates that you have
a MF type line and no adjust-
ment is required. Otherwise, you
will have to select the appropri-
using
ate setting.
press:
To display the SETUP menu,
press:
+
1.LANGUAGE
2.DATE & TIME
3.TERMINAL ID
4.DIAL TYPE
NOTE: Only 4 selections can
be displayed at one
time.
44
2
Display the DIAL
TYPE Menu
Select your dial line type.
4.DIAL TYPE
or and
(for Multi-Frequency type)
or
If the Line-2 board has been in-
stalled, repeat Step 2 for the
2nd line.
DIAL TYPE DIAL TYPE
1.MF 1.MF
2.DP 2.DP
After selecting the dial type, the
following will be displayed.
DELETE ACCESS DIGIT
ACCESS DIGIT=(MAX10)
Access
which are required by PBX sys-
tems to access the phone sys-
tem "outside" the PBX. A com-
mon access digit is "9."
3
Select Your Dial Enter the Access
Type Digits
Access Digits are PBX digits
such as 9, pause, and 1 which
need to be omitted when using
chain dialing.
If you do not require the use of a
credit card when chain dialing,
default
press
Otherwise, enter the number
(max. 10 digits) from the Dial
(for Dial Pulse type)
Keypad.
LINE-2
When the correct Access Digit is
displayed, press:
OPERATION COMPLETED
digits are numbers
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
4
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to skip this step.
to exit the Configuration Setting
mode and return to the Standby
Mode.