Enabling Or Disabling Send After Scan Temporarily - Toshiba DP125F Operator's Manual

Enabling or Disabling Send After Scan Temporarily

With the Send After Scan Mode
1
Default Setting set to "OFF", this
feature allows you enable the
Send After Scan mode for a
single transmission. Once that
Load the document face down
transmission is complete, the
in the Document Tray (see page
default status is regained.
88).
Adjust the resolution and con-
With Send After Scan selected,
trast if desired (see page 89).
every page of the doument will
be scanned into memory before
dialing will begin.
With Send After Scan set to NO
(off), your DP120F/DP125F will
begin dialing after the first page
is scanned to memory.
190
2
Load the Document
Turn the Flip Panels to the "50-
73" view to select the desired
Function Key.
Press:
MAY-17-00 WED11:13 SEND AFTER SCAN
1.YES
RESIDUAL MEMORY 100% 2.NO
ENTER TEL NUMBER
3
Display the SEND Select the Send After Scan Option
AFTER SCAN Menu
Select the desired Send After
Scan Option.
To disable Send After Scan,
press:
The following screen is dis-
played. You may dial the remote
facsimile for your communica-
tion job. The display will return
to the Standby Mode in about
60 seconds if no keys are
pressed.
OPERATION COMPLETED
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
Go to Step 5.
To enable Send After Scan,
press:
WHEN MEMORY FULL
1. DELETE SCAN PAGES
2. SEND SCAN PAGES
Go to Step 4.
After 2 seconds: