Precautions For Installation Of Fax Unit; Installation Of Fax Unit - Toshiba GD 1080 Service Handbook

Table of Contents

4. PRECAUTIONS FOR INSTALLATION OF FAX UNIT

After unpacking and installing the fax unit following the unpacking/setup instructions, be sure to perform

"Clearing all" described with the same instructions. The unit is not turned ON without this operation.

[Operation procedure]

Perform the following operation after setting the country/region in 08-201 and 701.

[1] [ ] [POWER]

[100]

the power is turned ON.) (It takes about 10 seconds until the display changes from '100' to 'CL'.)

[About FAX clearing mode/"Clearing all"]

When "Clearing all" is performed, the following operations are performed:

Data in the phone book, ID registration, transmission/reception journal, memory transmission jobs,

received data storing information stored in the NVRAM IC on the SYS board and HDD are erased.

The system setting area and Fax function setting area are initialized (the settings are reset to the

default values.)

[START] (It takes about 20 seconds for the digital keys to be operable after

4 - 1

GD1080/1090 PRECAUTIONS

Table of Contents

Gd 1090