Setting Up A Relay Box - Toshiba DP125F Operator's Manual

Relay Transmission, Relay-Relay Transmission Overview -
continued
How to Setup a Relay-Relay Transmission:
• Hub Station
1. Register the facsimile telephone number of the Second
Hub Station to a One Touch key or Abbreviated Number,
see pages 70 and 77 At this time, the Relay Box Number
located in the Second Hub Station should be registered as
the SUB Address of the One Touch key or Abbreviated
Number.
2. Create a Relay Box in the Hub Station, see "Setting Up a
Relay Box." Register the One Touch key or Abbreviated
Number programmed in Step 1 to the Relay Box as the
Second Hub Station.
• Second Hub Station
1. Register the facsimile telephone number of the End Sta-
tion to a One Touch key or Abbreviated Number, see
pages 76 and 77.
2. Create a Relay Box in the Second Hub Station, see "Set-
ting Up a Relay Box." Register the One Touch key or
Abbreviated Number programmed in Step 1 to the Relay
Box as the End Station.
• Originator
Transmit a document to the hub unit from an ITU-T relay
compatible remote facsimile (like the DP120F/DP125F) with
the procedures beginning on page 134.

Setting Up a Relay Box

This section describes the pro-
1
cedures to setup a Relay Box in
the DP120F/DP125F hub unit.
Using this function, all ITU-T F-
code compliant facsimiles can
Turn the Flip Panel to the "50-
receive or transmit documents
73" view to select the desired
to and from the DP120F/
Function Key.
DP125F. Relay Boxes must be
setup prior to utilizing the
Press:
DP120F/DP125F as a Relay
Box Hub. For more information,
see page 126.
You can assign a maximum of
50 End Stations using Addrevi-
ated Dial Numbers, One Touch
Keys, or Group Numbers.
2
Display the MAILBOX Select SETUP &
Menu DELETE
Select "4.BOX SETUP" by
pressing:
MAILBOX SETUP MAILBOX
1.CONFIDENTIAL 1.COMPLETE
2.BULLETIN BOARD
2.BOX SETUP
3.RELAY 3.BOX DELETE
4.BOX SETUP
127