Disabling Ecm Temporarily - Toshiba DP125F Operator's Manual

Disabling ECM Temporarily

If the ECM default setting is set
1
to ON, it is always effective for
communications on your facsim-
ile.
Press:
You can turn ECM OFF for a
single transmission using this
procedure. The facsimile will au-
tomatically return to its default
status immediately after that
transmission is complete.
NOTE:
If ECM is set to "OFF" in the
default setting procedure,
this procedure is not appli-
cable and the facsimile will
warn you with an error mes-
sage, "NOT ALLOWED
NOW."
172
2
Display the SET
ECM Menu
Select "2.OFF" by pressing:
+
The following screen is dis-
+
played. You may dial the remote
facsimile for your communica-
tion job. The display will return
to the Standby Mode in about
60 seconds if no keys are
pressed.
SET ECM COMM. RESERVATION
1.ON
2.OFF RESIDUAL MEMORY 100%
ENTER TEL NUMBER
Select the ECM
Option