Line Selection - Toshiba DP125F Operator's Manual

Line Selection

This option allows you to select
1
the phone line to be used for a
transmission if this facsimile is
equipped with the 2nd Line
Board.
Load the document face down
in the Document Tray (see page
You can activate this option
88).
when programming an Abbrevi-
ated Dial Number (see page 70)
Adjust the resolution and con-
or One Touch Dial Key (see
trast if desired (see page 89).
page 77) if the communication
with a certain remote party al-
ways requires this option.
NOTE:
Line 2 is available for trans-
mission if Line 2 has been
set for Transmission/Recep-
tion (see page 69). In addi-
tion, if Line 2 is set for recep-
tion only with timer, trans-
missions are only possible
when the timer has expired.
2
Load the Document Display the TEL
LINE SELECT Menu
Turn the Flip Panel to the "50-
73" view to select the desired
Function Key.
Press:
APR-15-00 SAT11:13
NOTE:
RESIDUAL MEMORY 100%
If no Line 2 Board is in-
ENTER TEL NUMBER
stalled, an error prompt will
result from this application.
TEL LINE SELECT
1.FIRST AVAILABLE
2.LINE #1
3.LINE #2
3 4
Select the Desired
Option
Select the desired option. Enter the number of the remote
facsimile using any of the fol-
To not select a specific line,
lowing dialing methods or you
press:
may designate another option at
this point.
To select Line 1, press:
To select Line 2, press:
COMM. RESERVATION
RESIDUAL MEMORY 80%
ENTER TEL NUMBER
Enter the Facsimile
Number
• One Touch Key Dialing
... See page 97
• Alphabet Dialing
... See page 98
• Abbreviated Dialing
... See page 99
• Keypad Dialing
... See page 100
189