8.
PRECAUTIONS FOR INSTALLATION OF FAX BOARD
8.1
When Replacing the Fax Board
When two lines are installed, be sure to handle line 1 and 2 correctly.
•
Line1: LED "OFF"
•
Line2: LED "ON"
8.2
After Replacing the Fax Board
Be sure to perform memory initialization and destination setting.
Procedure
[FS-11 FAX CLEAR MODE-SETUP FAX] - Select a destination - [OK] - [OK]
* An equipment will reboot.
© 2016-2020 Toshiba Tec Corporation All rights reserved
PRECAUTIONS FOR INSTALLATION OF FAX BOARD
8 - 1
8
GD-1370