3 ADVANCED FUNCTIONS
Send after scan
When the default setting for the send after scan function is set to "DIAL DURING SCAN", this
operation allows you to use the send after scan mode for a single transmission. Once that trans-
mission is complete, the default status is regained.
This function is selected, every page of the document is scanned into memory before dialing
begins.
Send after scan setting (
You can use the following dialing methods:
Keypad Dialing (Direct Entry with Digital Keys):
Digital Keys)"
One Touch Key Dialing:
Abbreviated Dialing:
Alphabet Dialing:
Group Dialing:
1
Press the [FAX] button on
the control panel.
2
Press the
"SEND AFTER SCAN" screen
appears.
3
Select "2. ON" using the
or
[ENTER] button.
4
Select the memory-full
option using the
button and press the
[ENTER] button.
[1.DELETE SCAN PAGES]: Deletes
the pages which have been
scanned.
[2.SEND SCAN PAGES]: Sends the
pages already scanned.
To cancel this function, press the
[FUNCTION CLEAR] or [CAN-
CEL] button to return to the Fax
basic screen.
5
Place the original(s) and perform the transmission operation.
102
Function Keys
P.188 "Send after scan")
P.48 "One Touch Key Dialing"
P.50 "Abbreviated Dialing"
P.51 "Alphabet Dialing"
P.53 "Group Dialing"
key.
button and press the
or
P.47 "Keypad Dialing (Direct Entry with
SEND AFTER SCAN
1.OFF
2.ON
SEND AFTER SCAN
1.OFF
2.ON
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES