General Specifications - YOKOGAWA TA220 User Manual

13.7 General Specifications

Item
Standard operating conditions
Ambient temperature:
Ambient humidity
Error in supply voltage
and frequency
Warm-up time
Storage Environment
Temperature
Humidity
Operating Environment
Temperature
Humidity
Rated supply voltage
Permitted supply voltage
range
Rated power supply frequency 50/60 Hz
Allowable power supply
frequency variation
Maximum power consumption 150 VA
Insulation resistance (between power supply and case)
Withstanding voltage (between power supply and case)
Signal ground
External dimensions
Weight
Cooling method
Installation position
Battery backup
Keylock
Recommended calibration
interval
Safety standard
Emission
13-6
Specifications
23±5°C
50±10%RH
Within 1% of rating
Approx. 30 minutes.
–20°C to 60°C
20% to 80% RH (no condensation)
5°C to 40°C
20% to 80%RH (no condensation)
100 to 120 VAC, 200 to 240 VAC
90 V to 132 VAC, 180 V to 264 VAC
48 to 63 Hz
10 MΩ or more (500 VDC)
2500 VAC at 50/60 Hz for 5 s
The ground of all input and output connectors are connected to the case ground. In addition, all
input terminals are protected using a diode.
Approx. 213 (W) × 132 (H) × 350 (D) mm excluding projections.
Approx. 5 kg (main unit only)
Forced air
Horizontal (stacking prohibited)
Setup information is backed up with the internal lithium battery
Able to set key lock.
1 year
Complying standard EN61010-1
• Overvoltage category (Installation category) II*1
• Pollution degree 2*2
• Measurement category II*3
Complying standard EN61326 Class A, C-Tick AS/NZS CISPR11
This product is a Class A (for commercial environment) product.
Operation of this product in a residential area may cause radio interference
in which case the user is required to correct the interference.
Cable requirement • BNC Connector
Use a BNC cable*4.
• GP-IB interface connector
Use a GP-IB shielded cable*4.
• Ethernet interface connector
Use an Ethernet interface cable*5.
Tests 1. Main terminal disturbance voltage (EN61326) Class A
2. Electromagnetic radiation disturbance (EN61326) Class A
3. Power supply harmonics restriction (EN61000-3-2)
4. Voltage fluctuation and flicker (EN61000-3-3)
IM 704610-01E