Communicate Group - YOKOGAWA TA220 User Manual

10.2 Commands
10.2.3

COMMunicate Group

This group consists of communication related commands. There are no front panel keys that correspond to this group.
:COMMunicate
:COMMunicate?
Function Queries all settings related to communications.
Syntax :COMMunicate?
Example :COMMUNICATE?
-> :COMMUNICATE:HEADER 1;VERBOSE 1
:COMMunicate:HEADer
Function Sets whether or not to attach a header to
response data for queries, or queries the current
setting (ON/OFF).
Syntax :COMMunicate:HEADer {<Boolean>}
:COMMunicate:HEADer?
Example :COMMUNICATE:HEADER ON
:COMMUNICATE:HEADER?
-> :COMMUNICATE:HEADER 1
:COMMunicate:LOCKout
Function Sets or clears local lockout.
Syntax :COMMunicate:LOCKout {<Boolean>}
:COMMunicate:LOCKout?
Example :COMMUNICATE:LOCKOUT ON
:COMMUNICATE:LOCKOUT?
-> :COMMUNICATE:LOCKOUT 1
Description This is a dedicated Ethernet command.
:COMMunicate:REMote
Function Sets remote or local mode. The instrument
enters Remote mode when set to ON.
Syntax :COMMunicate:REMote {<Boolean>}
:COMMunicate:REMote?
Example :COMMUNICATE:REMOTE ON
:COMMUNICATE:REMOTE?
-> :COMMUNICATE:REMOTE 1
Description This is a dedicated Ethernet command.
10-14
;
: HEADer
LOCKout
REMote
VERBose
WAIT ?
<Space> OFF
ON
<NRf>
?
<Space> OFF
ON
<NRf>
?
<Space> OFF
ON
<NRf>
?
<Space> OFF
ON
<NRf>
?
<Space> <Register>
?
:COMMunicate:VERBose
Function
Syntax
Example
:COMMunicate:WAIT
Function
Syntax
Example
Description See page 10-7 for information on
:COMMunicate:WAIT?
Function
Syntax
Example
Sets whether to use verbose or abbreviated
form in response data for queries, or queries the
current setting (ON/OFF).
:COMMunicate:VERBose {<Boolean>}
:COMMunicate:VERBose?
:COMMUNICATE:VERBOSE ON
:COMMUNICATE:VERBOSE?
-> :COMMUNICATE:HEADER ON
Waits for one of the specified extended events
to occur.
:COMMunicate:WAIT {<Register>}
<Register> = 0–65535 (see page 10-37 for
information on the extended event register)
:COMMUNICATE:WAIT 65535
synchronization using the
:COMMunication:WAIT command.
Creates response data when one of the
specified extended events occurs.
:COMMunicate:WAIT? {<Register>}
<Register> = 0 to 65535 (see page 10-37 for
information on the extended event register)
:COMMUNICATE:WAIT? 65535 -> 1
IM 704610-01E