Table of Contents
Advertisement
Safety Precautions
The instrument is marked with the following symbols.
iv
This instrument is an IEC safety class I instrument (provided with terminal for protective
earth grounding). The following general safety precautions must be taken during all
phases of operation, service, and repair of this instrument. If the instrument is used in a
manner not specified in this manual, the protection provided by the instrument may be
impaired. YOKOGAWA Electric Corporation assumes no liability for the customer's
failure to comply with these requirements.
Danger. Refer to the user's manual. This symbol appears on dangerous
locations on the instrument which require special instructions for proper handling
or use. The same symbol appears in the corresponding place in the manual to
identify those instructions.
Alternating current
ON (power)
OFF (power)
In-position of a bistable push control
Out-position of a bistable push control
IM 704610-01E
Advertisement
Table of Contents
