Setting Inhibit - YOKOGAWA TA220 User Manual

4.8

Setting Inhibit

Procedure
KEY
LOCK
Explanation
4-12
Display 2 Display 1
ns ms s
%
SEC RANGE
%/
S
Turning Inhibit ON and Selecting the Polarity
Press INHIBIT and select
illuminates and inhibit is turned ON.
Turning Inhibit OFF
Press INHIBIT to turn OFF both the
OFF.
You can inhibit measurements by applying an external signal (inhibit signal) to the inhibit
signal input terminal. This is possible even while the gate is open or during
measurement after arming activation.
Polarity
• : Inhibits measurements while a positive signal is being input.
• : Inhibits measurements while a negative signal is being input.
<<For a functional description, see section 2.4>>
L.MARK R.MARK
DISP OFF
V
MEASURE
E2T
JUDGE
PW
GO
BD x1 D to C
NO-GO GATE TIME
MEDIA FUNCTION
SHIFT SHIFT REMOTE
10%
LOCAL
20%
JDG LEVEL LEVEL
S
POLARITY
TRIG
AUTO MAN
SEC RANGE
SCALE
or . The indicator of the selected item
The phrase, "rotary knob & <>"
is used in the following
explanation to instruct the user
to enter numerical setting values
using the knob and arrow keys.
For details on this procedure,
see section 3.7.
DELAY BLOCK
ARMING INHIBIT
STORE UTILITY
RECALL ENTER
COUPLE EQ BOOST
IMPEDANCE EQUALIZER
50 Ω
1M Ω CONV
and indicators. Inhibit is turned
IM 704610-01E