Dcout Group - YOKOGAWA TA220 User Manual

10.2.4

DCOut Group

This group consists of DC output related commands.
:
:DCOut
:DCOut?
Function Queries all DC output related settings.
Syntax :DCOut?
Example :DCOut?
->:DCOUT:MODE JITTER;CYCLE 1
:DCOut:CYCLe
Function Sets the DC output average coefficient or
queries the current setting.
Syntax :DCOut:CYCLe <NRf>
:DCOut:CYCLe?
<NRf>=1 to 10 (in steps of 1)
Example :DCOUT:JITTER:CYCLE 1
:DCOUT:JITTER:CYCLE? -> 1
:DCOut:COEFficient
Function Sets the DC output correction coefficient or
queries the current setting.
Syntax :DCOut:COEFficient {NRf>},{NRf>}
:DCOut:COEFficient?
First parameter <NRf>= 0.0001 to 9.9999 (in
0.0001 steps)
Second parameter <NRf>= –9.999 to 9.999 (in
0.001 steps)
Example :DCOUT:COEFFICIENT
1.0000E+00,0.0000E+00
Description The first argument is the α in y = αx + β
The second argument is the β in y = αx + β
IM 704610-01E
;
MODE <Space>
?
CYCLe <Space>
?
COEFficient <Space>
?
;
: PERCent
JITTer
;
:
JUDGe PERCent
RESult
?
?
JITTer
JUDGe
<NRf>
<NRf> ,
<NRf>
<Space> <PCT>
?
?
<PCT>
<Space>
?
?
:DCOut:JITTer:PERCent
Function Sets the upper and lower limits for DC output of
the jitter ratio or queries the current setting.
Syntax :DCOut:JITTer:PERCent {PCT>},{PCT>}
:DCOut:JITTer:PERCent?
First parameter <PCT>= 0.01 to 100.00 (in 0.01
steps)
Second parameter <PCT>= 0.00 to 99.99 (in
0.01 steps)
The first and second parameters are maximum
value and minimum value, respectively. If the
maximum value is less than or equal to the
minimum value, an error occurs.
Example :DCOUT:JITTER:PERCENT
25.000PCT,0.000PCT
:DCOUT:JITTER:PERCENT?
->25.000E+00,0.000E+00
Description • PCT used in the example can be omitted.
• Can only be set or queried when the DCOUT
mode is JITTER.
:DCOut:JUDGe:PERCent
Function Sets the jitter ratio determination level or
queries the current setting.
Syntax :DCOut:JUDGe:PERCent {<PCT>}
:DCOut:JUDGe:PERCent?
<PCT>= 0.00 to 25.00 (in 0.01 steps)
Example :DCOUT:JUDGE:PERCENT 10.00PCT
:DCOUT:JUDGE:PERCENT?
-> :DCOUT:JUDGE:PERCENT 10.00E+00
Description • PCT used in the example can be omitted.
• Can only be set or queried when the DCOUT
mode is JITTER.
10.2 Commands
, <PCT>
10-15
10