Brightness Setting Of The Numerical Value Display (Display 2-Green) - YOKOGAWA TA220 User Manual

11.3 Brightness Setting of the Numerical Value
Display (Display 2-Green)
Procedure
KEY
LOCK SEC RANGE
Explanation
IM 704610-01E
Display 2 Display 1
ns ms s % V
%/
S
1. Press SHIFT+ENTER (UTILITY) . The Utility menu is shown on Display 2.
2. Turn the rotary knob to display System in Display 2.
3. Press >. init, ROMver, or LEDbrit is displayed.
4. Turn the rotary knob to display LEDbrit in Display 2.
5. Press > (or ENTER). Display 1 blinks.
6. Use rotary knob & < > to set the brightness.
7. Press ENTER.
You can set the brightness of the numerical display on Display 2 (green) according to the
surrounding lighting conditions.
Setting range: 1 to 6 (in steps of 1)
L.MARK R.MARK
DISP OFF
MEASURE
E2T
JUDGE
PW
GO
BD x1 D to C
NO-GO GATE TIME DELAY BLOCK
MEDIA FUNCTION ARMING INHIBIT
SHIFT SHIFT REMOTE STORE UTILITY
10%
LOCAL RECALL ENTER
20%
JDG LEVEL LEVEL COUPLE EQ BOOST
S
POLARITY TRIG IMPEDANCE EQUALIZER
AUTO MAN 50 Ω 1M Ω CONV
SEC RANGE
SCALE
The phrase, "rotary knob & <>"
is used in the following
explanation to instruct the user
to enter numerical setting values
using the knob and arrow keys.
For details on this procedure,
see section 3.7.
11-5
11