Flowchart Of Operation - YOKOGAWA TA220 User Manual

Flowchart of Operation

IM 704610-01E
The figure below is provided to familiarize the first-time user with the general flow of the
TA220 operation. For a more detailed description of each item, see the relevant section.
Preparing the Instrument Preparing the Instrument
Installing the instrument
Connecting the power supply and
turning the power switch ON and OFF
Connecting cables and a probe
Entering Measurement Conditions Entering Measurement Conditions
• Measurement function and polarity
• Input impedance and input coupling
• Equalizer
• Trigger mode and slice level
• Gate time
• Arming
• Block sampling
• Inhibit
• Other (as needed)
Displaying Measurement Results Displaying Measurement Results
• Meter (needle)
• Numerical values
• Determination
Signal Output Signal Output
• DC output of jitter ratio
• DC output of RF signal voltage level
• Other signal output
Section 3.2
Section 3.3,
Section 3.4
Section 3.5
Section 3.6
Section 4.1
Section 4.2
Section 4.3
Section 4.4
Section 4.5
Section 4.6
Section 4.7
Section 4.8
Section 4.9
Section 5.1
Section 5.2
Section 5.3
Section 7.1
Section 7.2
Section 7.3
ix