YOKOGAWA TA220 User Manual page 112

10.2 Commands
:INPut:EQ:BOOSt
Function Sets the equalizer boost amount or queries the
current setting.
Syntax :INPut:EQ:BOOSt {<NRf>}
:INPut:EQ:BOOSt?
<NRf> = 3.0 to 9.0
Example :INPUT:EQ:BOOST 3.0
:INPUT:EQ:BOOST?
-> :INPUT:EQ:BOOST 3.0
Description Cannot set or query when :INPut:EQ:STATus is
OFF.
:INPut:EQ:AGC
Function Sets the AGC function of the equalizer or
queries the current setting.
Syntax :INPut:EQ:AGC {<Boolean>}
:INPut:EQ:AGC?
Example :INPUT:EQ:AGC OFF
:INPUT:EQ:AGC?
-> :INPUT:EQ:AGC 0
Description When the function is PulseWidth and the
equalizer and AGC are turned OFF, the trigger
mode switches to manual trigger.
:INPut:EQ:DCCLamp
Function Sets the DC clamp function of the equalizer or
queries the current setting.
Syntax :INPut:EQ:DCCLamp {<Boolean>}
:INPut:EQ:DCCLAMP?
Example :INPUT:EQ:DCCLAMP OFF
:INPUT:EQ:DCCLAMP?
-> :INPUT:EQ:DCCLAMP 0
Description Cannot be set for media or functions that are
not equipped with an equalizer.
:INPut:EQ:PLLHold
Function Sets the PLL hold function of the equalizer or
queries the current setting.
Syntax :INPut:EQ:PLLHold {<Boolean>}
:INPut:EQ:PLLHOLD?
Example :INPUT:EQ:PLLHOLD OFF
:INPUT:EQ:PLLHOLD?
-> :INPUT:EQ:PLLHOLD 0
Description Cannot be set for media or functions that are
not equipped with an equalizer.
:INPut:HISPeed:STATe
Function Sets the D-to-C high speed calculation function
or queries the current setting.
Syntax :INPut:HISPeed:STATe {Boolean>}
:INPut:HISPeed:STATe?
Example :INPUT:HISPeed:STATe OFF
:INPUT:HISPeed:STATe?
-> :INPUT:HISPeed:STATe 0
Explanation This command is not available on products with
suffix code -BDS.
10-22
:INPut:PLL:STATus?
Function Queries the PLL lock status.
Syntax :INPut:PLL:STATus?
Example :INPUT:PLL:STATUS?
-> LOCK
Description 1. LOCK is returned if the result is lock.
2. UNLOCK is returned if the result is not lock.
IM 704610-01E