Table of Contents
Advertisement
9.3 Entering the TCP/IP and Timeout Settings, and Confirming the MAC Address
9-6
MAC Address
A MAC address is a unique address that is pre-assigned to the TA220. You can check
this MAC address.
Setting the Timeout Time
If access to the instrument is unavailable for the time specified here, the network
connection to the instrument is automatically closed. The default setting of 0 means that
no timeout time is specified.
Setting range: 1 to 60 s (in steps of 1 s)
Note
•
If you changed settings related to the network, the instrument must be power cycled.
•
If the instrument is turned ON with the DHCP function enabled without an Ethernet cable
connected, communications functions may not operate properly. In this case, turn DHCP
OFF and power cycle the TA220.
•
Network parameters such as the IP address must be specified also on the PC side. For
details on these parameters, consult your PC's user's manual (or help file) or with your
network administrator.
•
If - - - - - is displayed for the MAC address in Display 1, contact the dealer from which you
purchased the instrument.
IM 704610-01E
Advertisement
Table of Contents
