Usb Driver Installation Procedure - IDEC MICROSmart FC6A Series User Manual

A
PPENDIX

USB Driver Installation Procedure

This section describes how to install the USB driver that is required when connecting the FC6A Series MICROSmart to PC.
Installing on Windows XP
1. Connect a USB cable to the USB port on the FC6A Series MICROSmart (with power supplied) while the computer is running.
After the message "Found New Hardware" appears on the computer, the driver installation wizard appears. Select No, not this
2.
time and click Next.
Select Install the software automatically (Recommended) and click Next.
3.
Click Continue Anyway button.
4.
If the installation is aborted without showing the dialog box above, Block is selected in the Driver Signing Options in Driver
Signing in the System Properties dialog box. If the installation is aborted, this option should be changed to Warn. After
changing the option to Warn, reconnect the FC6A Series MICROSmart and retry the installation procedure from the step 1.
Installation is now complete. Click Finish.
5.
A-10 FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL