Fonts - IDEC MICROSmart FC6A Series User Manual

A
PPENDIX

Fonts

This section describes the fonts that can be displayed on the HMI module LCD.
Supported Languages
The HMI module is equipped with fonts for multiple languages as standard. Messages in the language selected with the MSG
instruction can be displayed on the LCD.
The menu can be displayed in English, Chinese, or Japanese, and messages can be displayed in a desired language out of the
following languages: German, English, Italian, Spanish, Dutch, French, Cyrillic, Chinese, and Japanese.
Installed Fonts List
Setting name
Western European
Japanese
Chinese
Cyrillic
Note: Some of the characters cannot be input.
Character Code Table
Using the Character Code Table
Example: Finding the character code for the character "a" in the table.
Lower 4 bits of the code (hexadecimal)
The upper 4 bits of the code are hexadecimal 6.
The lower 4 bits of the code are hexadecimal 1.
Therefore, the character code for "a" is as follows.
" a " : 6 1
Lower 4 bits
Upper 4 bits
Note: For other fonts and two-byte characters, refer to the table of the relevant code system.
A-12
Character code system
ISO8859-1 (Latin-1)
Shift-JIS
GB2312
ANSI1251
FC6A S MICROS
ERIES
Supported languages
English, German, Italian, Spanish, Dutch (Note), French (Note)
Japanese (level 1)
Chinese (simplified)
Russian
Upper 4 bits of the code (hexadecimal)
U ' M FC9Y-B1722
MART SER S ANUAL