IDEC MICROSmart FC6A Series User Manual page 445

Hide thumbs Also See for MICROSmart FC6A Series:
Table of Contents

Advertisement

Control Registers
Data registers are set as the devices to store the parameters for the analog I/O module. Multiple words are used starting from the
set data register. The number of words of data registers that are used differs according to the analog I/O module model and the
"Use data register for setting parameters" setting.
"Use Data Register
for Setting
FC6A-J2C1 FC6A-J4A1 FC6A-J8A1 FC6A-J4CN1 FC6A-J4CH1Y FC6A-J8CU1 FC6A-K2A1 FC6A-K4A1 FC6A-L06A1 FC6A-L03CN1
Parameters"
Disabled
Enabled
When "Use data register for setting parameters" is disabled
Only the data and status are stored in control registers.
Note: At the first scan when stop changes to run, the analog I/O module is set with the parameters (initial values) configured in WindLDR. While
the parameters are being set, the analog I/O module status is initializing. After the parameters are finished being set, the analog I/O module
operates normally.
When "Use data register for setting parameters" is enabled
In addition to the data and status, the operation mode, data type, minimum value, and maximum value are stored in control
registers. For analog inputs, the filter value and thermistor settings are also stored.
Notes:
When the CPU module is switched from stop to run, the analog I/O module is set with the values of the operation setting data registers.
The parameters (initial values) configured in WindLDR are transferred to the operation setting data registers when the user program is
updated or when a keep data sum check error occurs.
When the "Write operation setting parameters" input changes from off to on, the analog I/O module is set with the content of the operation
setting data registers in the END processing of the same scan.
While the parameters are being set, the analog I/O module status is initializing. After the parameters are finished being set, the analog I/O
module operates normally.
4
8
16
14
28
56
FC6A S
MICROS
ERIES
Used Data Registers (words)
8
8
16
28
28
80
U
'
M
FC9Y-B1722
MART
SER
S
ANUAL
9: A
I/O M
NALOG
4
8
12
12
24
40
ODULES
6
20
9-11

Advertisement

Table of Contents
loading

Table of Contents