IDEC MICROSmart FC6A Series User Manual page 193

Hide thumbs Also See for MICROSmart FC6A Series:

Table of Contents

Removing from DIN Rail

Lower the FC6A Series MICROSmart's DIN rail hook with a flathead screwdriver (1) and lift it up while pulling forward (2).

Direct Mounting on Panel Surface

This section describes how to mount the FC6A Series MICROSmart directly onto a mounting plate for installation in a control panel.

The direct mounting method differs according to the FC6A Series MICROSmart. To mount the FC6A Series MICROSmart directly, it

may be necessary to make holes in the mounting plate depending on the FC6A Series MICROSmart model.

Direct Mounting Methods

■ 16- and 24-I/O types

Mount using the screw holes on the back of the module.

■ 40-I/O type and the HMI module

Pull out the DIN rail hook on the back of the module, attach the direct mounting hook (maintenance part: FC6A-PSP1PN05), and

then mount the module to the mounting plate using the screw holes.

Direct Mounting Hook

(FC6A-PSP1PN05)

■ Expansion and expansion interface modules

Pull out the DIN rail hook on the back of the module, attach the direct mounting hook (maintenance part: FC6A-PSP2PN05), and

then mount the module to the mounting plate using the screw holes.

(2) Pull outward and upward.

DIN Rail Hook

Direct Mounting Hook

(FC6A-PSP2PN05)

(1) Lower DIN Rail Hook.

DIN Rail Hook

NSTALLATION AND