Displaying Arbitrary Messages - IDEC MICROSmart FC6A Series User Manual

7: HMI F
UNCTION

Displaying Arbitrary Messages

This section describes how to switch the message displayed on the LCD by executing the message (MSG) instruction.
Switching between Multiple Message Screens
When the display conditions for multiple MSG instructions are satisfied, the messages are displayed according to the priorities set
for the MSG instructions.
The message with the highest priority is displayed, out of all the MSG instructions with the inputs on, by pressing the
button on the standard screen.
By further pressing the
On the standard screen, press the
1.
Running
2015/DEC/01/TUE
13:30:40
The message with the highest priority is displayed out of all the MSG instructions with the inputs on.
Today's production count
Type A: 10000 pcs.
Type B: 30000 pcs.
Press the (up) button.
2.
The message with the next highest priority is displayed.
*Insufficient parts*
Manu. Line Process 1
2015/06/01
Press the (down) button.
3.
Today's production count
Type A: 10000 pcs.
Type B: 30000 pcs.
Press the (ESC) button to return to the standard screen.
4.
Running
2015/DEC/01/TUE
13:30:40
For details on the MSG instruction, see Chapter 12 "Display Instructions" in the "FC6A Series MICROSmart Ladder Programming
Manual".
7-40
(up) button, the message with the next highest priority is displayed.
(up) button.
FC6A S MICROS
ERIES
U ' M FC9Y-B1722
MART SER S ANUAL
(up)