Basic Operations - IDEC MICROSmart FC6A Series User Manual

7: HMI F
UNCTION

Basic Operations

This section describes basic operation methods for the HMI module buttons.
The HMI module has the
to operate the screens displayed on the LCD.
Pushing the Switches
The operation of the buttons differs by how they are pressed. There are two ways to push the buttons, which are detailed below.
Press/Hold
Press
Press and hold
(up), (down) buttons
■
Moves the cursor up and down to select menu items. These buttons are also used to change numeric values.
(left), (right) buttons
■
Moves the cursor left and right. These buttons are also used to move the digit.
(ESC), (OK) buttons
■
Confirm menu items with the
7-6
(up), (down),
The switch is pressed for 0.1 seconds or more and less than three seconds and then released.
The switch is pressed for three seconds or more and then released.
(OK) button. Return to the previous screen with the
Return to the
previous screen.
FC6A S MICROS
ERIES
(left), (right), (ESC), and
Operation
Run
Edit Program
External Memory
Configurations
Device Monitor
Status Monitor
Error Status
Backlight ON Time
00010 sec
Stop
External Memory
Device Monitor
Status Monitor
Confirm menu items.
Do you want to
stop PLC?
No
Yes
U ' M
MART SER S ANUAL
(OK) buttons, and these buttons are used
(ESC) button.
FC9Y-B1722