Operator Interface Connectivity; Using J1939 Communication - IDEC MICROSmart FC6A Series User Manual

1: G I
ENERAL NFORMATION

Operator Interface Connectivity

The FC6A Series MICROSmart can perform maintenance communication with IDEC operator interfaces using Ethernet port 1, serial
port 1, and communication cartridge. FC6A Series MICROSmart device values can be monitored and modified by the connected
operator interface. An Ethernet cable or an O/I communication cable
operator interface.
For details on the communication settings, see the "WindO/I-NV2 User's Manual", the "WindO/I-NV3 User's Manual", and the
"WindO/I-NV4 User's Manual".
Supported ports
USB Port
No
*1 Only the RS-232C communication cartridge and RS-485 communication cartridge are supported.
■ 1:1 Maintenance Communication Example with an IDEC Operator Interface Using Serial Port 1
This example shows maintenance communication between the FC6A Series MICROSmart and an operator interface, as well as
monitoring and changing FC6A Series MICROSmart device values using the operator interface. An IDEC operator interface is
connected to serial port 1 of the FC6A Series MICROSmart.
Operator Interface
*1 For details on O/I communication cables, see "Cables" on page A-14.

Using J1939 Communication

The CAN J1939 All-in-One CPU module can be connected to a J1939 communication network using the CAN port and it can communicate
with other J1939 communication-compatible devices. Messages that conform to the SAE J1939 standard can be sent and received.
For details on J1939 communication, see the "FC6A Series MICROSmart Communication Manual".
Supported ports
USB Port
No
■ CAN Port Usage Example
This example shows the FC6A Series MICROSmart communicating with a J1939-compatible engine. The CAN port of the CAN
J1939 All-in-One CPU module is connected to the engine.
CAN Port
1-18
Serial Port 1 Ethernet Port 1 and 2
Yes
Serial Communication Port
(RS232C)
O/I Communication Cable: FC6A-KC2C
(D-sub 9-pin connector style, cable length: 5 m)
Serial Port 1 Ethernet Port 1 and 2
No
CAN
FC6A Series MICROSmart
(CAN J1939 All-in-One CPU Module)
FC6A S MICROS
ERIES
*1
is used to connect the FC6A Series MICROSmart and the
Communication Cartridge
and Communication Module
Yes
Communication
No
Engine
U ' M FC9Y-B1722
MART SER S ANUAL
*1
CAN Port
Yes
FC6A Series MICROSmart
Serial Port 1
(Port 1)
CAN Port
Cartridge
No
No
Yes