IDEC MICROSmart FC6A Series User Manual page 115

Type No.
Selection of Input Type and Input
Range
Calibration or Verification to Maintain
Rated Accuracy
*1 The total input delay time increases in proportion to the number of channels used. Input channels that have been set to unused are not
included in the number of enabled input channels.
*2 FC6A-J8A1 (Version lower than 200) supports 4096 (12 bits) digital resolution.
The input values per step are as follows:
Voltage: 2.44 mV (0 to 10 V), 4.88 mV (-10 to +10 V)
Current: 4.88 μA (0 to 20 mA), 3.91 μA (4 to 20 mA)
When using FC6A-J8A1 (Version 200 or later), the digital resolution can be selected from 12 bits or 16 bits in Analog I/O Module Configuration
dialog box in WindLDR.
*3 The arbitrary setting is a function that uses the digital resolution data by scaling it to arbitrary data (that arbitrarily sets the lower limit value and
the upper limit value). The range setting (-32,768 to 32,767) is specified with data registers.
Example: When -5 V is input, 1,024 is displayed as long as the arbitrary setting is not configured, but -500 is displayed when the arbitrary
setting is configured as upper limit value = 1,000 and lower limit value = -1,000, and this makes it easier to intuitively read the input
voltage value.
When the digital resolution data is 12 bits and the input range is -10 to +10 V
Lower Limit Value=-1,000 -500
Raw Input Value
Input Voltage Value
*4 Input data out of range is reflected in the status of the analog I/O module.
Mixed Analog I/O Module
Type No.
Voltage
Current
Thermocouple
Input Type
and
Input Range
Resistance Thermometer
Thermistor
Resistor
Voltage
Current
Thermocouple
Input
Impedance
Resistance Thermometer
Thermistor
Resistor
FC6A-J2C1 FC6A-J4A1
Using programming software
Not possible
Upper Limit Value=1,000
0 1,024
-10 V -5 V
0 to 10 V
-10 to 10 V
4 to 20 mA
0 to 20 mA
1 MΩ or higher
50 Ω or lower
1 MΩ or higher
1 MΩ or higher
1 MΩ or higher
1 MΩ or higher
FC6A S MICROS
ERIES
FC6A-J8A1 FC6A-J4CN1
4,095
10 V
FC6A-L06A1
―
―
U ' M FC9Y-B1722
MART SER S ANUAL
2: P S
RODUCT PECIFICATIONS
FC6A-J4CH1Y
FC6A-L03CN1
(K) -200 to 1,300°C (-328 to 2,372°F)
(J) -200 to 1,000°C (-328 to 1,832°F)
(R) 0 to 1,760°C (32 to 3,200°F)
(S) 0 to 1,760°C (32 to 3,200°F)
(B) 0 to 1,820°C (32 to 3,308°F)
(E) -200 to 800°C (-328 to 1,472°F)
(T) -200 to 400°C (-328 to 752°F)
(N) -200 to 1,300°C (-328 to 2,372°F)
(C) 0 to 2,315°C (32 to 4,199°F)
Pt100: -200 to +850°C (-328 to 1,562°F)
Pt1000: -200 to +600°C (-328 to 1,112°F)
NI100: -60 to +180°C (-76 to 356°F)
NI1000: -60 to +180°C (-76 to 356°F)
―
―
FC6A-J8CU1
2-85