IDEC MICROSmart FC6A Series User Manual page 522

Hide thumbs Also See for MICROSmart FC6A Series:

Table of Contents

ONFIGURATION

Module Configuration Editor Functions

The Module Configuration Editor functions are as follows. For the operating procedures of the functions, see "Basic Module

Configuration Editor Operations" on page 12-3.

Insert expansion modules and cartridges

Delete expansion modules and cartridges

Swap expansion modules and cartridges

System software version upgrade

Read module configuration

Expansion modules and cartridges can be inserted into the

dragging and dropping them from the expansion modules and cartridges list.

By inserting expansion interface remote master and remote slave modules, the nodes can be

Inserted expansion modules and cartridges can be deleted.

When an expansion module is deleted, all of the modules placed on the right side of the deleted

module are shifted to the left.

Inserted expansion modules and cartridges can be moved to a different position.

The system software on the CPU module, analog I/O module, PID module, expansion interface

remote master module, expansion interface remote slave module, HMI module, and Bluetooth

communication cartridge can be upgraded.

Information about the expansion modules and cartridges connected to the CPU module is stored

in special data registers. The configuration of expansion modules and cartridges connected to the

CPU module is automatically displayed by acquiring this information.

module configuration area