IDEC MICROSmart FC6A Series User Manual page 526

12: M C
ODULE ONFIGURATION
Swapping Expansion Modules and Cartridges
This section describes how to change the position of expansion modules and cartridges that have been inserted into the module
configuration area.
Select the expansion module or cartridge to move and drag and drop it onto the destination expansion module or cartridge.
1.
Notes:
When the position of an I/O module is changed, the device addresses are automatically changed. For example, when the position of digital

input module (1) and (2) are changed as shown below, the device addresses I0030 to I0037 for digital input module (1) are changed to
I0050 to I0057. However, please note that the device addresses in the program are not replaced.
CPU Module
When the positions of an analog I/O module or analog I/O cartridge are changed, the configured parameters are also moved. However, the

device addresses in the program are not replaced.
12-6
E
DITOR
Input Module (1) Input Module (2)
Quantity of Inputs: 8 Quantity of Inputs: 16
(I0030 to I0037) (I0040 to I0057)
Input Module (2) Input Module (1)
Quantity of Inputs: 16 Quantity of Inputs: 8
(I0030 to I0047) (I0050 to I0057)
FC6A S MICROS
ERIES
U ' M FC9Y-B1722
MART SER S ANUAL