Module Configuration Editor; Module Configuration Editor Overview - IDEC MICROSmart FC6A Series User Manual

Hide thumbs Also See for MICROSmart FC6A Series:

Table of Contents

This chapter provides a description of the Module Configuration Editor that can be used to configure expansion modules and

The FC6A Series MICROSmart is capable of using the expansion modules and cartridges described in "Product Specifications" on

page 2-1. To use expansion modules and cartridges, they must be configured to connect to the FC6A Series MICROSmart using the

WindLDR Module Configuration Editor.

Module Configuration Editor Structure

The Module Configuration Editor is composed of the following three areas.

Module configuration area

Expansion modules and cartridges list : Displays a list of expansion modules and cartridges that can be connected to the FC6A

Parameter reference area

The module configuration that will be used is created by selecting the expansion modules and cartridges to use in the expansion

modules and cartridges list and dragging and dropping them to the module configuration area.

Module Configuration Area

ONFIGURATION

: Displays the configuration of connected expansion modules and cartridges.

Series MICROSmart.

: Displays the parameters that are configured for the expansion modules and cartridges.

Parameter Reference Area

Expansion Modules and Cartridges List