BeaconMedaes TotalAlert Infinity Installation, Operation And Maintenance Instructions page 55

TotalAlert Infinity™ HTM Medical Gas Notification System
The SETUP INFORMATION screen is the first screen that
users will see on an unconfigured alarm.
(The MAIN screen is the first screen that users will see
on a configured alarm).
• Touch the Configuration button.
Configuration Button
Figure 72: Setup Information Screen
NOTE:
If you would like to change the password, touch
Change Password. Enter a 4-10 digit password,
and touch the Enter button. Confirm the new
password. Touch the X button in the upper right to
close the SECURITY PASSWORD screen.
Figure 73: Changing the Security Password
Entering the Password
The ENTER SECURITY PASSWORD screen appears.
Figure 74: Entering the Security Password
Enter the security password. (The default password is
121212.)
• Touch the Enter button.
• Touch Continue to advance to the
CONFIGURATION screen.
• The CONFIGURATION screen will display as
unconfigured and ready for setup.
Primary Settings Tab
The PRIMARY SETTINGS tab allows you to select the
alarm type and initialize boards.
• Touch the PRIMARY SETTINGS tab.
• Alarm Type Tab
The ALARM TYPE screen defines which type of alarm
will be displayed and drives later setup functions.
Figure 75: Alarm Type Tab
4-21 4107 9016 60.01