BeaconMedaes TotalAlert Infinity Installation, Operation And Maintenance Instructions page 41

TotalAlert Infinity™ HTM Medical Gas Notification System
The SETUP INFORMATION screen is the first screen that
users will see on an unconfigured alarm. (The MAIN
screen is the first screen that users will see on a
configured alarm.)
Password Setup - Unconfigured Alarm
• Touch the Configuration button.
Configuration Button
Figure 22: Setup Information Screen
Entering the Password
The ENTER SECURITY PASSWORD screen appears.
• Enter the security password. (The default password
is 121212.)
• Touch the Enter button.
• Touch Continue to advance to the CONFIGURATION
screen.
Figure 23: Entering the Security Password
Note:
If you would like to change the password, touch
Change Password. Enter a 4-10 digit password, and
touch the Enter button. Confirm the new password.
Touch the X button in the upper right to close the
SECURITY PASSWORD screen.
Figure 24: Changing the Security Password
• The CONFIGURATION screen will display as
unconfigured and ready for setup.
Figure 25: Unconfigured Configuration Screen
4-7 4107 9016 60.01