BeaconMedaes TotalAlert Infinity Installation, Operation And Maintenance Instructions page 111

TotalAlert Infinity™ HTM Medical Gas Notification System
TotalAlert Infinity Central alarm allows for
setup of 4 alarm conditions (ie. Change
Cylinders, Change Immediate, Reserve Low,
Pressure Fault). A customized instruction
can be created for each condition.
12. To setup first alarm condition, select
"CONDITION ONE" tab on badge (located
just under the NORMAL label). Enter non-
latin language characters for the Condition
One (ie. Change Cylinders). Then enter non-
latin language for instructions in the "Alarm
Condition One Instructions" section. (See
Figure 270)
13. To save, select "Save Location Label"
button.
Figure 270
14. Repeat step 12 and 13 to setup Condi-
tions Two, Condition Three, and Condition
Four. (See Figure 271)
Figure 271
4107 9016 60.01
15. Choose "Back" button to return to the
main setup screen.
16. To setup the Information Screen from
the pull down menu, first select Other La-
bels tab, then Choose "Information Screen
Version" from pull down menu. Then input
the non-latin language character for "Ver-
sion" in the writable tab. (See Figure 272)
17. To save, select "Save Label" button.
Repeat the proceedure for setting up the
Alarm Points, Test Alarm, Warning, and
Wireless (Wi-Fi). Figures 273 thru 276. Save
the label after each non-latin language ad-
dition.
9-10
Figure 272
Figure 273