Parameter Lists - Danfoss VLT Series Programming Manual

Parameter Lists

5 Parameter Lists
5.1 Parameter Options
5.1.1 Default settings
Changes during operation:
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE" means that
the frequency converter must be stopped before a change can be made.
5 5
4-Set-up:
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter can have four
different data values.
'1 set-up': data value will be the same in all set-ups.
SR:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. 100
index
Conv. 1
factor
Data type
2
3
4
5
6
7
9
33
35
54
206
75 74 70 67 6
3600000 3600 60 1/60 100000
0
Description
Integer 8
Integer 16
Integer 32
Unsigned 8
Unsigned 16
Unsigned 32
Visible String
Normalized value 2 bytes
Bit sequence of 16 boolean variables
Time difference w/o date
MG.11.CC.02 - VLT
®
VLT HVAC Drive Programming Guide
5 4 3 2
10000 10000 1000 100
0
®
is a registered Danfoss trademark
1 0 -1 -2 -3
10 1 0.1 0.01 0.001 0.000
-4 -5 -6
0.00001 0.00000
1 1
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD