Danfoss VLT Series Programming Manual page 177

Parameter Description
24-93 Missing Motor Coefficient 3
Range:
0.0000 [-100.0000 -
*
100.0000 ]
3 3
24-94 Missing Motor Coefficient 4
Range:
0.000 [-500.000 - 500.000 ] Enter the constant of the Missing
*
24-95 Locked Rotor Function
Option:
[0] Off
*
[1] Warning
24-96 Locked Rotor Coefficient 1
Range:
0.0000 [-10.0000 -
*
10.0000 ]
24-97 Locked Rotor Coefficient 2
Range:
0.0000 [-100.0000 -
*
100.0000 ]
24-98 Locked Rotor Coefficient 3
Range:
0.0000 [-100.0000 -
*
100.0000 ]
24-99 Locked Rotor Coefficient 4
Range:
0.000 [-500.000 - 500.000 ] Enter the constant of the Locked
*
176
VLT
Function:
Enter the linear coefficient of
the Missing Motor detection
function.
Function:
Motor detection function.
Function:
Select the action to be taken if the motor current
is above the limit calculated as a function of the
output frequency. The function is used for
detecting e.g. a locked rotor in multi-motor
applications.
Function:
Enter the cubic coefficient of the
Locked Rotor detection function
multiplied by 1000.
Function:
Enter the quadratic coefficient of
the Locked Rotor detection
function multiplied by 1000.
Function:
Enter the linear coefficient of
the Locked Rotor detection
function.
Function:
Rotor detection function.
MG.11.CC.02 - VLT
®
HVAC Drive Programming Guide
®
is a registered Danfoss trademark