Danfoss VLT Series Programming Manual page 88

Parameter Description
8-91 Bus Jog 2 Speed
Range: Function:
200 RPM [ 0 - par. 4-13 Enter the jog speed. This is a fixed
*
RPM] jog speed activated via the serial
port or fieldbus option.
8-94 Bus Feedback 1
Range: Function:
0 [-200 - Write a feedback to this parameter via the
*
200 ] serial communication port or fieldbus option.
This parameter must be selected in
20-00 Feedback 1 Source, 20-03 Feedback 2
Source or 20-06 Feedback 3 Source as a feedback
source.
8-95 Bus Feedback 2
Range: Function:
0 [-200 - 200 ] See 8-94 Bus Feedback 1 for further details.
*
8-96 Bus Feedback 3
Range: Function:
0 [-200 - 200 ] See 8-94 Bus Feedback 1 for further details.
*
®
VLT HVAC Drive Programming Guide
®
MG.11.CC.02 - VLT is a registered Danfoss trademark
3 3
87